37
IREPPY - 1404 - 4238051_01
BC20
Condensate drain tray
For plenum PLS horizontally ceiling mount-
ed.
In plastic material, allows the collection
of condensate that forms during the op-
eration with chilled water on the hydraulic
connections and any three way valve.
VMF CRP
Accessory module for controlling boilers,
heat recovery units and pumps.
VCHR
Three way valve kit with insulation
For plenum PLS and PLSM with water coil
(W).
Complete with connection tube and fix-
ings between valve and heat exchanger
coil.
With insulation to avoid the formation of
condensation when operating with chilled
water.
The valve is of the on-off type and is 230V
single phase powered.
BC10
Condensate drain tray
For plenum PLS vertically wall mounted.
In plastic material, allows the collection
of condensate that forms during the op-
eration with chilled water on the hydraulic
connections and any three way valve.
VCHD
Two way valve
For plenum PLS and PLSM with water coil
(W).
Complete with connection tube and fix-
ings between valve and heat exchanger
coil.
The valve is of the on-off type and is 230V
single phase powered.
Warning:
To avid condensation the tubing must be
suitably insulated (neoprene polyure-
thane, polypropylene), of 6-10mm thick-
ness.
Also available is the condensate tray
accessory BC10 and BC20.
To Next Page
Loading...
