6
GENERAL STANDARDS
The present manual is an integral part of the docu-
mentation enclosed with the machine.
It must be conserved for future reference and must
accompany the machine throughout its working life.
The manual defines the purpose for which the
machine was built and establishes the correct instal-
lation and use limits.
• All use, installation and maintenance instructions of the unit are descri
-
bed in this manual as well as the main accident prevention standards.
• Read carefully and fully all information contained in this manual before
the installation, start-up, use, maintenance and cleaning of the unit. Pay
particular attention to the use regulations accompanied by the words
“DANGER” or “WARNING”: failure to observe them could cause damage
to the machine and/or persons and property.
• For irregularities not contemplated by this manual, consult the local
After Sales Service.
• AERMEC S.p.A. decline any responsibility for any damage due to the
improper use of the machine, and to a partial or supercial reading of
the information contained in this manual.
• Installation and maintenance must be carried out by trained and quali-
ed personnel, having the requirements laid down by law 46/90 and/or
DPR 380/2001 for electric/electronic and air conditioning installations,
with consequent registration at the local CHAMBER of COMMERCE.
Otherwise AERMEC S.p.A. decline all responsibility regarding the safety
of the product.
THE MANUFACTURER DECLINES ANY RESPONSIBILITY FOR DAMAGE
TO PROPERTY, PERSONS OR ANIMALS CAUSED BY THE NON-OBSER-
VANCE OF THE INDICATIONS AND REGULATIONS CONTAINED IN THIS
MANUAL.
Even though a suitable risk analysis was carried out during the design
of the TA unit, pay ATTENTION to the pictograms on the machine; these
make it easier to read the manual, quickly drawing the reader’s attention
to risks that cannot be avoided or suciently limited with the adoption of
protection means and measures.
GENERAL DANGER SIGNS
Carefully observe all indications at the side of the pictogram.
The non observance of the indications could cause hazar
-
dous conditions with possible injury to the operator and to
the user in general.
VOLTAGE DANGER SIGN
Carefully observe all indications at the side of the pictogram.
The signs indicate components on the unit or, in the present
manual, identify areas that could generate risks of an electri
-
cal nature.
GENERAL WARNING SIGNS
Carefully observe all indications to the side of the pictogram
that limit some actions in order to ensure greater safety for
the operator.
MAIN GUARANTEE CONDITIONS
• The guarantee does not include payment for damages due to incorrect
installation by the installer.
• The guarantee does not include payment for damages due to the
improper use of the unit by the user.
• The manufacture is not responsible for injuries to the installer or user,
caused by incorrect installation or improper use of the unit;
• The equipment must be installed in such a manner so as to permit
maintenance and/or repair operations;
• The guarantee does not cover in any case costs due to turntable lad
-
ders, scaolding or other similar elevating systems that are necessary
to carry out operations under guarantee.
The guarantee is not valid if:
• the services and repairs have been carried out by unauthorised person-
nel or companies;
• the unit has been previously repaired or modied with non-original
parts;
• the unit has not been suitably maintained;
• the instructions given in this manual have not been observed;
• unauthorised modications have been made.
NB:
the manufacturer reserves the right to carry out modications at any
time deemed necessary to improve its product, and is not obliged to
apply the said modications to previously manufactured machines that
have already been delivered or are being constructed.
The general conditions are in any case subject to the general sale condi-
tions foreseen on the stipulation of the contract.
To Next Page
Loading...
Need help?
General