8
2.3 SETTING A NUMERICAL VALUE FOR A PARAMETER
Many parameters (e.g. the seasonal operating set-points) require the user to enter
a numerical value. In these cases, proceed as follows:
1. Once you have accessed a page containing an editable numerical value (e.g.
the operating set-points), press on the value already displayed.
2. A numerical keypad will now appear, where you can enter a new value;
3. Press "Enter" on the keypad to conrm and apply the new value, or press "Esc"
to delete the operation.
Once you have selected the numerical value to be modied, the nu-
merical keypad will show the Minimum and Maximum values that
can be set for that parameter.
2.4 SETTING A VALUE, SELECTING IT FROM A LIST
Some parameters (e.g. selecting the setpoints to be used) provide for the user to
select an option taken from a list of possible alternatives; in these cases, proceed
as follows:
1. Once in a page that contains an editable value (e.g. the setpoint to be used),
press directly on the currently displayed option;
2. After having selected it, a list of options will be displayed via dropdown menu;
3. Pressing one of the options selects it and applies it;
To Next Page
Loading...
Need help?
General
