Specifications
Table 5. Physical Specification of the Aerogen Solo Nebulizer
Dimensions 67 mm H x 48 mm W x 25 mm D
(2.6 in. H x 1.88 in. W x 1 in. D)
Nebulizer Weight 13.5 g (0.5 oz) nebulizer and plug
Nebulizer Capacity Maximum 6 mL
Table 6. Physical Specification of the Aerogen Pro Nebulizer
Dimensions 45 mm H x 50 mm W x 50 mm D
(1.8 in. H x 2.0 in. W x 2.0 in. D)
Nebulizer Weight 25 g (0.9 oz.) nebulizer and filler cap
Nebulizer Capacity Maximum 10 mL
Table 7. Physical Specification of the Aerogen USB Controller
Dimensions 2865mm L X 28mm W X 25.2mm H
(112.8 in. L X 1.1 in. W X 1 in. H)
Aerogen USB
Controller Weight
91g (3.2 oz)
Table 8. Environmental Specifications of the Aerogen USB Controller System
Operating Maintains specified performance at circuit pressures up to 90 cm
H
2
O and temperatures from 5 °C (41 °F) up to 40 °C (104 °F).
Atmospheric Pressure 700 to 1060 mbar
Humidity 15 to 93% relative humidity
Noise Level < 35 dB measured at 1m distance
Transport &
Storage
Transient Temperature Range -25 to +70 °C (-13 to +158 °F)
Atmospheric Pressure 450 to 1060 mbars
Humidity Up to 93% relative humidity.
To Next Page
Loading...
