Afikim PRS4024a - Part A: Disassembling the Front and Battery Covers

6/21
Part A: Disassembling the Front and Battery Covers
When mounting the canopy onto scooters, follow the instructions below.
1.
Dismantle the:
a. Front cover.
b. Seat.
c. Battery Cover.
From the scooter.
2.
Cut bores in the front
cover, for the inner
bracket.
Cut bores in the
designated locations,
as shown. A tool,
such as this DREMEL
tool, may be used to
cut bores.
Front cover
DREMEL tool
Bore holes
Front cover, Exterior and Interior Views, Showing Bore Holes
Battery cover
Seat
Battery cover