2
1. Power button
2. Power jack (5 VDC)
3. Charge/AC indicator
4. USB ports
5. OTDR/source port
6. Power meter port
7. VFL port
Controls, Display, Interfaces
8. Dust cover
9. Home button
10. Start/stop test button
11. VFL indicator
12. VFL button
13. Touchscreen display
Battery Charging
• Plug the included AC charger into AC outlet.
• Connect charger plug to power jack
2
.
• LED
3
indicates charging status as follows:
OFF - AC not connected
RED - Charging battery
GREEN - Fully charged
• FlexScan charges while operating.
Configure FlexScan to Auto-Off
• From the Home screen, select Settings menu.
• Locate and select the Auto Off Timer menu.
• From the Auto Off Timer menu, select the desired
power save option (5 min, 15 min, Never).
2
4
5 6 7
3
12
13
10
9
1
8
11
To Next Page
Loading...
