To Next Page

To Previous Page

Operation

4.3.2 Parameter Setting

4.3.3 Query Interface

UP/DOWN

Main Menu

SET

Enter

Input Password

Para Adj:

Para: XXX

Power Off and

Restart Inverter

Finish

Para View:

Max VoLtage: XXX

Min VoLtage: XXX

Max FrEquency: XXX

Min FrEquency: XXX

Safety: XXX

Note:

SET

Reset the inverter parameters by selecting SET. Passwords are needed for the

setting, which only can be operated by after sales personnel to make sure the

safety and normal operation of the inverter.

PV power limit

PVA =***%，PVB=***%，PVA+PVB=1. In fact, only choose to adjust the PVA,

PVB is linked. Only for three phase（3-10kW）.

Note:

The inverter need to be

restarted to finish parameter

setting.

The open circuit voltage of each solar string should not be lower

than 200V nor higher than 850V, othersie the inverter will generate

less or no power.

Afore BNT003KTL User Manual

Questions and Answers: