Why is there mist inside the glass surface of my AG Neovo RX-22G Monitor?
Mist forming inside the glass surface of your AG Neovo monitor happens due to humid weather conditions. This is a normal occurrence and the mist will disappear after a few days or as soon as the weather stabilizes.
Why is there no audio output from my AG Neovo Monitor?
If there is no audio output from your AG Neovo Monitor, check the following: * Ensure the volume is not set to 0. * Verify that the AUDIO SETTING > AUDIO setting is not set to OFF. * For VGA or DVI input, check the audio setting of the computer. * For HDMI or DisplayPort input, select the correct audio input source.
What to do if the LED indicator on my AG Neovo Monitor is amber?
If the LED indicator on your AG Neovo Monitor is amber, ensure that your computer is turned on and is not in standby mode. If it is in standby mode, move the mouse or press any key to wake up the computer.
How to adjust image position on AG Neovo Monitor?
If the image position on your AG Neovo Monitor is incorrect, adjust the H. POSITION and V. POSITION values.
General| Resolution | 1920 x 1080 |
|---|---|
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle (Horizontal) | 170° |
| Viewing Angle (Vertical) | 160° |
| Screen Size | 21.5 inches |
| Input Connectors | VGA, DVI, HDMI |
| Power Consumption | 25 W |
To Next Page
