EasyManuals Logo

AGA Legacy 44 User Manual

AGA Legacy 44
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check ap pli ance is safe when you have finished.
50
Conversion to Propane
This appliance is supplied set for Natural gas. A
conversion kit for Propane gas is supplied with
the range.
If the appliance is to be converted this must be
done before installation. The conversion must
be performed by a qualifi ed LP gas installer.
After conversion the installation must comply
with the relevant regulations and also the local
electricity supply company requirements. Read
the instructions before converting this appliance.
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and
lead to prosecution.
This instruction must be used in conjunction with
the rest of the appliance instruction, in particular
for information on Standards, range positioning,
connection hose suitability etc.
When servicing or replacing gas-carrying
components disconnect from gas before
commencing operation and check appliance is
gas sound after completion.
Do not use re-conditioned or unauthorised gas
controls..
Orifices
Standard burner Wok burner
A orifi ce, B internal injector, C external injector
Remove burner caps and heads. Remove
old orifi ces, save the orifi ces removed from
the appliance for future use. Fit new orifi ces.
Reassemble in reverse order.
Orifices Natural Gas Propane Gas
Wok burner internal 110 internal 71
external 166 external 93
Large Burner 170 106
Medium Burners 150 84
Small Burner 107 61
Valve adjustment
Pull off all the control knobs. If the hand rail
has been fi tted remove it - remove the plastic
blanking plugs and remove the 2 end bracket
xing screws.
Remove the 2 cross headed screws that were
hidden by the hand rail end brackets.
Open the oven door & or broiler door and
remove the fi xing screws underneath the control
panel.
Lower control panel clear.
Unscrew the tap bypass screw.
A valve bypass screw
Using a pair of long nose pliers carefully remove
the bypass screw and fi t the correct replacement
screw. Tighten the screw down.
Save the screws removed from the appliance for
possible future use.
Valve Bypass screws
Natural Gas Propane Gas
Wok burner 82 49
Large Burner 70 38
Medium Burners 53 31
Small Burner 43 22

Other manuals for AGA Legacy 44

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AGA Legacy 44 and is the answer not in the manual?

AGA Legacy 44 Specifications

General IconGeneral
BrandAGA
ModelLegacy 44
CategoryRanges
LanguageEnglish

Related product manuals