14
Care and Handling
CAUTION
Use of control or calibration procedures other than those specified here in
may result in hazardous radiation exposure.
1) The LT300 is a precision instrument that must be handled with
care. Avoid shock and vibrations.
2) After use, it’s recommend that you wipe the laser dry and store in a dry
place. Do not store the laser in its case if the laser or the case are wet.
3) Do not store the laser at temperatures below -4°F (-20°C) or above
176°F (80°C); the electronic components could be damaged.
4) To maintain the precision of your laser, check and adjust it regularly.
5) Keep the glass lighthouse of the laser clean with a soft cloth and glass
cleaner.
Warranty
Your LT300 laser is guaranteed to be free of manufacturing defects for a peri
od
of one year. Any abnormal usage, or if the instrument has been subjected to
shock, will void this warranty. Under no circumstances will the liability of
the manufacturer exceed the cost of repairing or replacing the instrument.
Disassembling the laser by other than qualified technicians will void the
warranty. Specifications are subject to change without notice.
To Next Page
Loading...
