EasyManua.ls Logo

Agatec LT 300 User Manual

Agatec LT 300
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Automatic self-levelling laser
Niveau laser automatique
Instruction Manual
Manuel d’utilisation
AGATEC
21 Boulevard Littré
00 Le Mesnil le Roi - France
: +33(0)1 34 93 36 31
x: +33(0)1 34 93 35 89
AGL
ATEC Construction Lasers
2202 Redmond Rd.
acksonville, AR 72076
Phone: 800.643.9696
Fax: 501.982.0880
ail: sales@agl-lasers.com
QBL
Liegnitzer Str. 1-3
D- 42489 Wülfrath
l :+49-(0)2058-7881 0
: +49-(0)2058-7881 52
nfo@quante-baulaser.de
PRIM’TOOLS
orecrown Commercial Building,
Electric Road - North Point
Hong Kong
Tel: 852 2566 3667
Fax: 852 2566 9968
7:35 Page 45

Other manuals for Agatec LT 300

Question and Answer IconNeed help?

Do you have a question about the Agatec LT 300 and is the answer not in the manual?

Agatec LT 300 Specifications

General IconGeneral
Laser ColorRed
Self-LevelingYes
Self-leveling range±5°
Laser wavelength635 nm
IP ratingIP54
Operating Temperature-10°C to +40°C
TypeRotary Laser
Range300m with detector
Rotation speed600 rpm
Laser classClass 2

Summary

LT300 Laser Product Overview

Key Specifications and Features

Details on the laser's capabilities, accuracy, speed, and physical attributes.

Essential Safety Precautions

Critical safety guidelines for operating the laser, focusing on eye protection.

LT300 Laser Operation Guide

Setup and Initial Positioning

Instructions for setting up the laser on tripods, walls, or stable surfaces.

Mode Selection and H.I. Alert

How to select operating modes and understand the H.I. Alert function.

LT300 Laser Advanced Features

Manual Grade and Beam Adjustment

Procedures for setting manual grades and adjusting the laser beam's position.

Battery Charging and Care

Instructions for charging the rechargeable battery and general care.

LT300 Laser Calibration Procedures

Calibration Overview and X-Axis Check

Introduction to calibration and the steps to check the X-axis.

Calibrating X and Y Axes

Detailed instructions for electronically calibrating the X and Y axes of the laser.

Z-Axis Calibration and Cone Error

Procedure for Z-axis calibration and checking for cone error.

LT300 Laser Accessories

Laser Detectors and MR50 Overview

Information on laser detectors, and the MR50 detector's features and keypad.

MR50 Operation and MR80S Introduction

Usage of the MR50 detector and the MR80S as a detector/remote.

MR80S Specifications and Remote Control

MR80S technical details, remote functions, and battery replacement.

Related product manuals