EasyManua.ls Logo

AGFA CR - General Safety Instructions

AGFA CR
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
2313B EN 20041109
Introducing the CR User Station
CR USER STATION
Safety precautions
General safety instructions
The CR User Station complies with the EN 60950 standard for Information
Technology. This means that, although it is absolutely safe, patients may
not come in direct contact with the equipment. Therefore the operator
console must be placed outside a radius of 1.5 m around the patient.
Perform no other operations on the CR User Station than those described
in this document.
Pay attention when working near the pedestal: the foot projects slightly and
could be tripped on. When rolling the pedestal away from its position, take
care not to pull or put any strain on power or network leads.
When moving the CR User Station, take care that it remains stable at all
times. In particular, the following considerations should be kept in mind:
the nature of the floor and any floor-coverings, carpets, etc.;
any obstructions such as cables;
any slopes to be negotiated.
To avoid collisions and instability the monitor must be turned over the
ID Tablet when moving over longer distances, as shown below:

Related product manuals