16
2313B EN 20041109
Introducing the CR User Station
CR USER STATION
The Agfa service technician can remove the back grid when inserting new
equipment or connecting the cables.
The Agfa service technician can adjust the height of the monitor arm
(monitor height at center 1340 mm - 1490 mm).
PC (server or client)
On the PC, the ID Software for the ID Tablet will be installed for the
identification of the cassettes (refer to ‘ID Software’ on page 18). It can also
be used for the QS Software that is necessary for the image processing.
Network Switch
Network Switch for several network connections, e.g. the Digitizer to the
PC, printers, etc.
UPS (Uninterruptible Power Supply)
The UPS for the PC is an "Uninterruptible Power Supply" that protects the
PC when the main power supply has crashed, and avoids the loss of
images. UPS configuration requires special software. This software will be
installed and configured by an Agfa service technician.
To Next Page
Loading...
