Chapter 2 — Installing the scanner for the Macintosh computer 15
Chapter 2 — Installing the scanner for the
Macintosh computer
This chapter shows you how to set up your SnapScan with your Macintosh
computer.
Hardware requirements
In s t allat io n o f t h e scan n e r h ard ware
Ch o o s in g a S CS I ID n u mb e r
Co n n e c t in g t h e s c an n e r
Te s t in g t h e c o n n e c t io n
E le c t ro n i c re g is t rat io n
In s t allat io n o f t h e so f t w are
P lacin g re f le c t iv e o rig in als
Hardware requirements
■ A 68020 processor.
■ A 14 inch color monitor with thousands of colors for an accurate display of
color images.
■ 12 MB of RAM (16 MB is recommended)
■ A high-capacity disk drive.
■ A CD-ROM drive.
■ System 7.1
™
or higher.
■ The amount of disk space available on your computer determines the number
and the size of the images you can scan. Make sure you have enough free
storage space on your hard disk. You need about two times the size of the
image to scan, edit and save it. You need minimum 20 MB free hard disk
space.
To Next Page
Loading...
