AGFA SnapScan 300 - P R E P a R I N G T H E S C a N N E; Un P Ackin G T H E Scan N E; Un lo Ckin G T H E Scan N E; L O Ckin G T H E Scan N E

Chapter 1 — Preparing the scanner 10
Chapter 1 — Preparing the scanner
This chapter helps you to prepare your SnapScan for installation.
Unpacking the scanner
Un l o c kin g t h e s c an n e r
L o c kin g t h e s c an n e r
Takin g a clo s e r lo o k
P e rf o rmin g a p o we r-o n t e s t
Unpacking the scanner
1. Open the packing box and carefully take out all the items.
2. Check each item to make sure that you have everything listed on the box and
the packing list. Check if there is no visible defect.
If something is missing, contact your dealer.
3. Remove the plastic wrapping and the packing materials from the scanner.
❖ Note: Save the packing materials to protect the scanner during later
transport.
All manuals and user guides at all-guides.com