AGFA SnapScan 300 - Un lo Ckin G T H E T Ran Sp Are N Cy O P T Io; Co N N E Ct in G T H E T Ran Sp Are N Cy O P T Io

Appendix A — Using the transparency option 45
Unlocking the transparency option
Unlock the transparency option before connecting it to the scanner.
1. You will see the locking screw at the base of the transparency option.
2. Turn the screw counterclockwise and remove it. Keep it for later transport.
Your transparency option is unlocked.
Connecting the transparency option
1. Check if your scanner and your transparency option are properly unlocked.
2. Switch off your scanner.
3. Switch off your computer.
4. If the automatic document feeder is installed, disconnect it from your
scanner.
All manuals and user guides at all-guides.com