Chapter 4 — Using the scanner 38
Electronic registration
Use the electronic registration on the Agfa Scanners CD-ROM. You will be asked
to register when you install the software that came with your scanner. You will find
the product serial number at the rear of your scanner.
1. Insert the Agfa scanners CD ROM in your CD ROM drive.
Your computer automatically scans the CD and opens the AGFA scanners
window.
Windows should detect the CD-ROM and then automatically run the
installation program. If it does not run the program, first double-click the CD-
ROM icon in ‘My Computer’ and then double-click agfascan.exe.
If you are a Windows 3.xx or a Windows NT 3.51 user. Open the Program
Manager. From the File menu choose Run and then Type
d:\agfascan.exe and press <Enter>. If your CD-ROM drive is not using
the drive letter “d”, replace “d” by the drive letter of your CD-ROM.
2. Click your language: English.
You will be asked if you want to install Acrobat. You need Acrobat to read
your documentation.
3. Click SnapScan.
4. Click Install software.
5. Click Register.
6. Follow the instructions on your screen.
Installing the software
Windows 95
Installing the SCSI driver
1. Turn on your scanner and your computer.
Windows 95 will automatically detect the new hardware.
2. Follow the instructions on the screen.
Windows 95 will ask you to insert the Windows 95 CD-ROM or diskettes to
install the driver for your SCSI card. It will also ask you to install the driver for
your scanner.
3. Select ‘Driver from disk provided by hardware manufacturer’ and click OK.
4. Insert the Agfa Scanners CD-ROM into your CD-ROM drive.
5. Click Browse.
To Next Page
Loading...
