Chapter 4 — Using the scanner 40
Windows 3.11
Installing the SCSI driver and the software
1. Switch on your scanner and your computer.
2. Insert the Software Collection CD-ROM in your CD-ROM drive.
3. Open the Program Manager.
4. From the File menu choose Run.
5. Type d:\softcol.exe and press <Enter>.
If your CD-ROM drive is not using the drive letter “d”, replace “d” by the drive
letter of your CD-ROM.
6. Follow the instructions on the screen and Install iPhoto Plus.
7. Remove the CD-ROM from your CD-ROM drive.
8. Insert the Agfa Scanners CD-ROM into your CD-ROM drive.
9. Open the Program Manager.
10. From the File menu choose Run.
11. Type d:\agfascan.exe and press <Enter>.
If your CD-ROM drive is not using the drive letter “d”, replace “d” by the drive
letter of your CD-ROM.
12. Follow the instructions on the screen.
Caution: Make sure to install EZ-SCSI, the driver for your SCSI card.
Install Adobe Acrobat Reader (to read the documentation), FotoSnap (the
easy-to-use scanner driver), and FotoLook (the professional scanner driver).
13. Close the installer program.
The installation of the software is finished.
14. Remove the CD-ROM from the CD-ROM drive.
For the latest up-to-date information, refer to the FotoLook Read Me files.
Installing additional software
To install any additional software that came with your scanner, follow the
instructions of the manufacturer.
To Next Page
Loading...
