Chapter 4 — Using the scanner 42
Install Adobe Acrobat Reader (to read the documentation), FotoSnap (the
easy-to-use scanner driver), and FotoLook (the professional scanner driver).
12. Close the installer program.
The installation of the software is finished.
13. Remove the CD-ROM from the CD-ROM drive.
For the latest up-to-date information, refer to the FotoLook Read Me files.
Installing additional software
To install any additional software that came with your scanner, follow the
instructions of the manufacturer.
Windows NT version 4.0
Installing the SCSI driver
1. Switch on your scanner and your computer.
2. Open the Control Panel.
3. Open SCSI Adapters.
The SCSI Adapters dialog box appears.
4. Select the Drivers page and click Add.
The Install Driver dialog box appears.
5. Select Adaptec in the Manufacturers list and ‘Adaptec AHA 151x’ in the SCSI
Adapter list.
6. Click OK.
The installation of the drivers is finished. Your computer will restart.
Installing the software
1. Insert the Software Collection CD-ROM in your CD-ROM drive.
Windows should detect the CD and then automatically run the installation
program. If it does not run the program, first double-click the CD-ROM icon in
‘My Computer’ and then double-click softcol.exe.
2. Follow the instructions on the screen and install iPhoto Express (the image
editing software).
3. Remove the CD-ROM from your CD-ROM drive.
4. Insert the Agfa Scanners CD-ROM into your CD-ROM drive.
The CD-ROM will start up automatically. If it does not start up, first double-
click the CD-ROM icon in ‘My Computer’ and then double-click
agfascan.exe.
To Next Page
Loading...
