8 Purification Solution - Operator's Guide
2
Executing a Purification Task
Configuring a new task
Configuring a new task
1 Click Add Task to select a task template or choose to clone the currently
selected task and create a new purification task.
2 Verify that the Analytical System matches the system providing the analytical
run, and the Preparative System that corresponds to the current preparative
instrument configuration.
The current instrument configuration of the preparative system is
displayed in the table.
If one of the systems does not match, choose another template to create
your task. If there is no matching template, ask the Method Developer to
create one.
3 Select the Analytical Run page and specify the source of the analytical run:
• To run an analytical scouting sequence on a combined analytical and
preparative system, select an existing ChemStation sequence or prepare
a sequence from scratch. Select the path and name of an existing
ChemStation sequence in the text input field or click Edit sequence to
start editing a sequence from scratch or modifying a selected sequence.
You can also import a sequence as a text (CSV or TXT) file.
• To use analytical results that have already been acquired on a
stand-alone system, specify the location of the source files (result set or
single sample results) in the text input field.
Select data files using the Process? checkbox in the sequence table.
4 Select the Preparative Run page and specify a Preparative base method.
5 Set the preparative vial locations and injection volumes. You may want to
apply a location mapping for vial locations. Specify the injection volume for
the first sample and use the fill-down option to apply the same volume for
other samples.
To Next Page
Loading...
Need help?
General
