Agilent Technologies 33522A User Manual

26
Chapter 1 Quick Start
To Set a DC Offset Voltage
1
3 Select the desired units.
Press the softkey for the desired units. When you select
the units, the
waveform generator outputs the waveform with the displayed
offset (if the
output is enabled). For this example, press V. The voltage will be set as
shown below.
Note: Y
ou can also enter the desired value using the knob and cursor
keys.

Agilent Technologies 33522A Specifications

General

Brand	Agilent Technologies
Model	33522A
Category	Laboratory Equipment
Language	English