57
Agilent 34410A/11AL4411A 6½ Digit Multimeter
Service Guide
Agilent Technologies
3
Calibration Procedures
Agilent Technologies Calibration Services 58
Calibration Interval 58
Adjustment is Recommended 58
Time Required for Calibration 59
Automating Calibration Procedures 59
Recommended Test Equipment 60
Performance Verification Tests 60
Input Connections 62
Test Considerations 63
Verification Tests 64
Calibration Security 75
Calibration Message 77
Calibration Count 77
Calibration Process 78
Aborting a Calibration in Progress 79
Adjustments 80
This manual contains procedures for verification of the instrument’s
performance and adjustment (calibration).
Closed–Case Electronic Calibration. The instrument features closed–case
electronic calibration. No internal mechanical adjustments are required.
The instrument calculates correction factors based upon the input
reference value you set. The new correction factors are stored in
non–volatile memory until the next calibration adjustment is performed.
Non–volatile EEPROM calibration memory does not change when power
has been off or after a remote interface reset.
To Next Page
Loading...
Need help?
General
