Getting Started
81150A and 81160A Getting Started Guide 23
Select the Low Level by pressing the Low softkey, or by using the
navigation keys.
Set the value to 0.0 V. Use the numeric keypad, or the navigation
cursor and rotary knob to set the values.
Select the appropriate unit shown in the following screen.
Select the High Level by pressing the High softkey, or by using the
navigation keys.
Set the value to 2.5 V. Use the numeric keypad, or the navigation
cursor and rotary knob to set the values.
Select the appropriate unit shown in the following screen.
To Next Page
Loading...
