To Next Page

To Previous Page

Specific Command Summary Specific Commands

Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition 45

:DISPlay

:BRIGhtness/? Controls or queries the current display brightness. page 186

:CONTrast/? Controls or queries the current display contrast. page 186

:ENABle/? Switches the display on or off, or queries whether the display is

on or off.

page 187

:LOCKout/? Sets or queries local lockout mode. page 187

:FETCh[n][:CHANnel[m]][:SCALar]

:POWer[:DC]? Returns a power value from a sensor. page 87

:RETurnloss? Returns the current return loss value. page 87

:MONitor? Returns the current power value from the monitor diode within a

return loss module.

page 88

:INITiate[n]:[CHANnel[m]]

[:IMMediate] Starts a measurement. page 88

:CONTinuous/? Starts or Queries a single/continuous measurement. page 89

:LOCK/?

Switches the lock on/off or returns the current state of the lock. page 80

:INPUT[n][:CHANnel[m]]

:ATTenuation/? Sets or returns the attenuation factor for the instrument. page 148

:OFFset/? Sets or returns the offset factor for the instrument. page 149

:OFFset:DISPlay Sets the offset factor so that attenuation factor is zero. page 149

:OFFset:POWermeter Sets the offset factor to the difference between the power mea-

sured with a powermeter and with the monitor diode.

page 150

:ATTenuation:SPEed/? Sets or queries the filter transition speed page 150

:WAVelength/? Sets or queries the modules attenuation wavelength page 151

:OUTPut[n][:CHANnel[m]]

:APMode/? Sets or queries whether power setting or attenuation value has

been changed.

page 151

:APOWeron/? Sets or queries the shutter status at power on. page 157

:ATIMe/? Sets or queries the powermeter averaging time. page 157

:CONNection/? Selects or returns Analog Output parameter. page 113

:CORRection:COLLection:ZERO Zeros the offsets of attenuators powermeter page 157

:CORRection:COLLection:ZERO:ALL Zeros all available powermeter channels in mainframe page 158

Table 4 Specific Command Summary (continued)

Command Description Page

Agilent Technologies 8163B Programming Guide

Other manuals for Agilent Technologies 8163B