Agilent Technologies 8163B Programming Guide

Status Reporting – The STATus Subsystem Instrument Setup and Status
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition 69
Type Bit 5 Bit 6 Bit 7 Decimal Value
none 0 0 0 0
exact value 1 0 0 32
extrapolate below 1 1 0 96
extrapolate above 1 0 1 160
interpolated 1 1 1 224
command:
:STATusn:OPERation:ENABle
syntax: :STATusn:OPERation:ENABle<wsp><value>
description: Sets the bits in the Operation Slot Status Enable Mask (OSSEM) for slot n that enable the
contents of the Operation Slot Status Event Register (OSSER) for slot n to affect the OSESR.
Setting a bit in this register to 1 enables the corresponding bit in the OSSER for slot n to af-
fect bit n of the OSESR.
parameters: The bit value for the OSSEM as a 16-bit signed integer value (0 .. +32767)
response: none
example: stat:oper:enab 128
command:
:STATusn:OPERation:ENABle?
syntax: :STATusn:OPERation:ENABle?
description: Returns the OSSEM of slot n
parameters: none
response: The bit value for the OSSEM as a 16-bit signed integer value (0 .. +32767)
example: stat:oper:enab? → +128<END>
command:
:STATus:PRESet
syntax: :STATus:PRESet
description: Presets all bits in all the enable masks for both the OPERation and QUEStionable status sys-
tems to 0, that is, OSSEM, QSSEM, OSESM, and QSESM.
parameters: none
response: none
example: stat:pres

Agilent Technologies 8163B Specifications

General

Brand	Agilent Technologies
Model	8163B
Category	Measuring Instruments
Language	English