Chapter 6 283
Troubleshooting the RF Section
Service Equipment You Will Need
Service Equipment You Will Need
Refer to the table entitled, “Recommended Test Equipment,” in
Chapter 1 of the 8590 Series Analyzers Calibration Guide for a list of the
recommended test equipment needed to troubleshoot and repair the analyzer.
Although Agilent Technologies equipment is recommended, any equipment
that meets the critical specifications given in the table can be substituted for
the recommended model.
Refer to Chapter 13, “Softkey Descriptions,” of this guide for a list of
recommended service tools and required hand tools needed to troubleshoot and
repair the analyzer.
After an Analyzer Repair
If one or more analyzer assemblies have been repaired or replaced,
perform the related adjustments and performance verification tests.
Refer to Chapter 2, “Making Adjustments,” for a table of Adjustments
and Tests for Replaced or Repaired Assemblies, for the related
adjustments and performance verification tests required for each
assembly.
To Next Page
Loading...
Need help?
General
