General Information and Safety Practices and Hazards
6 Agilent Cary 3500 UV-Vis Spectrophotometer User’s Guide
This manual, with safety practices and hazards information, instructions for
installing and maintaining the components of the Cary 3500 UV-Vis and
troubleshooting information.
The Cary UV Workstation Help and Learning Center provided with the Cary UV
Workstation software which provide step-by-step instructions for installing
selected accessories and programming applications, step-by-step instructions
for frequently performed analyses and instructions for using any accessories
you ordered.
Conventions
The following conventions have been used throughout the documentation:
Menus, menu items, buttons and check boxes have been typed in bold. For
example, ‘click
OK’ and ‘From the Edit menu, choose Copy’.
ALL CAPITALS indicate keyboard commands. For example, ‘Press ENTER’ and
‘Press SHIFT+F3’.
Notes and Tips
A Note is used to give advice or information.
A Tip is used to give practical hints to help you achieve the best possible
performance from your instrument.
Verifying Safe State
The following general safety precautions must be observed during all phases of
operation, maintenance and service of this instrument.
To ensure continued safety of the instrument after maintenance or service
procedures verify the instrument is returned to a safe state for the user. This
includes running performance checks to verify the instruments safety systems are
functioning correctly. Check the general condition of the instrument during
operation for wear or signs of corrosion that are likely to inhibit function or safety.
Failure to comply with these precautions or with specific warnings elsewhere in
this manual violates safety standards of design, manufacture, and intended use of
the instrument. Agilent Technologies assumes no liability for the customer’s
failure to comply with these requirements.
To Next Page
Loading...
