Agilent Technologies E3634A Operating Manual

Chapter 4 Remote Interface Reference
Output Setting and Operation Commands
75
4
VOLTage {<voltage>| MINimum | MAXimum|UP|DOWN}
This command programs the immediate v oltage level of the power supply. The
immediate level is the voltage value of the output terminals.
The VOLTage command changes the output of the power supply to t he newly
programm ed value regardless of the outpu t range presently selected.
You can substitute ‘‘ MINimum ’’ or ‘‘ MAXimum ’’ in place of a specific value for
the voltage parameter.
MIN selects the lowest voltage values of ‘‘0’’ volts. MAX
selects the highest voltage values allowed for the selected range.
This command also increases or decreases the immediate voltage level using
the ‘‘
UP ’’ or ‘‘ DOWN ’’ parameter by a predetermined amount. The command
VOLTage:STEP sets the amount of increase or decrease. Notice that a new
increment setting will cause a n execution error -222 (Data out of range) when
the maximum or the minimum rated voltage is exceeded.
VOLTage The following program segments show how to use the VOLT UP or
Example
VOLT DOWN comm and to increase or decrease the output voltage with the
VOLT:STEP comm and.
‘‘ VOLT:STEP 0.01 ’’ Set the step size to 0.01 V
‘‘ VOLT UP ’’ Increase the output voltage
‘‘ VOLT:STEP 0.02 ’’ Set the step size to 0.02 V
‘‘ VOLT DOWN ’’ Decrease the output voltage
VOLTage? [MINimum | MAXimum]
This query returns the presently programmed voltage level of the power
supply.
VOLT? MAX and VOLT? MIN return the highest and lowest
programmable voltage levels for the selected range.

Agilent Technologies E3634A Specifications

General

Brand	Agilent Technologies
Model	E3634A
Category	Power Supply
Language	English