Chapter 1 Quick Start
To Rack Mount the Instrument
25
1
To Rack Mount the Instrument
You can mount the power supply in a standard 19-inch rack cabinet using one of three
optional kits available. Instructions and mounting hardware are included with each
rack-mounting kit. Any Agilent Technologies System II instrument of the same size
can be rack-mounted beside the Agilent E3646A, E3647A, E3648A, or E3649A.
Note: Remove the front and rear rubber bumpers before rack-mounting the
instrument.
To remove the rubber bumper, stretch a corner and then slide it off.
Front Rear (bottom view)
To rack mount a single instrument, order adapter kit 5063-9243.
To Next Page
Loading...
Need help?
General
