Chapter 3 Front-Panel Operation and Features
View Menu Operation
48
Viewing the Errors
1 Press key twice to view the errors.
Total number of the errors detected will be displayed shortly before the above message
is displayed. The above number ‘‘1’’ stands for the first error in queue and the ‘‘-103’’
is error code.
2 Scroll through the error numbers and view the text of the error message by using
the knob and key.
Press key to increase the scrolling speed of the text on the display.
3 Clear the errors and exit the menu.
All errors are cleared when you exit the menu by pressing key or let the display
time out for about 30 seconds.
See ‘‘Error Messages’’ for more information starting on page 125 in chapter 5.
Viewing the Firmware Revision
1 Enter the View menu and select FW REVISION.
2 View the firmware revision of your power supply.
The first number is the firmware revision number for the main processor; the second
is for the input/output processor; and the third is for the front-panel processor. See
“Firmware Revision Query” on page 62 for more information.
1: err -103
FW REvision
REV X.X-Y.Y-Z.Z
To Next Page
Loading...
Need help?
General
