Hardkey and Softkey Reference ESG Family Signal Generators
Recall
4-86 User’s Guide
Recall
Pressing the front panel Recall key reveals a menu of softkeys. These
softkeys are described in this section in alphabetical order.
Delete All Regs in Seq [n]
Press this softkey to delete the data saved in all of the registers of the
selected sequence. Do not press this softkey until you have selected the
correct sequence using the softkey. For example, if you want to delete
the data in all of the registers that are saved in sequence 4, press
Select Seq. The currently selected sequence is displayed in the active
entry area. Change the number to 4 using the up and down arrow keys,
the front panel knob, or enter a 4 using the numeric keypad and press
the
Enter terminator softkey. Sequence 4 is now displayed in all softkeys
which specify a sequence in this menu. Now press
Delete All Regs in Seq [4]
and the data in all of the registers stored in sequence 4 will be deleted.
Be certain that you want to delete this data; you cannot recover it once
deleted.
NOTE This softkey has exactly the same function as the softkey with the
identical name in the front panel Save key menu.
Softkey Location:
Recall > Delete All Regs in Seq[n]
Delete All Sequences
Press this softkey to delete all of the data in all saved registers of all
sequences. Be certain that you want to delete the data; you cannot
recover it once deleted.
NOTE This softkey has exactly the same function as the softkey with the
identical name in the front panel Save key menu.
Softkey Location:
Recall > Delete All Sequences
To Next Page
Loading...
Need help?
General
