Hardkey and Softkey Reference ESG Family Signal Generators
Save
4-92 User’s Guide
Clear Text
Press this softkey to delete the comment text in the active entry area. If
you want to change the comment text saved with a register, use this
softkey to quickly delete the existing text, then use the remaining
editing features to enter a new comment.
Softkey Location:
Save > Add Comment To Seq[n] Reg[nn] > Editing Keys >
Clear Text
Delete All Regs in Seq [n]
Press this softkey to delete the data saved in all of the registers of the
selected sequence. Do not press this softkey until you have selected the
correct sequence using the
Select Seq softkey. For example, if you want to
delete all of the registers that are saved in sequence 4, press
Select Seq.
The currently selected sequence is displayed in the active entry area.
Change the number to 4 using the up and down arrow keys, the front
panel knob, or enter a 4 using the numeric keypad and press the
Enter
terminator softkey. Sequence 4 is now displayed in all softkeys which
specify a sequence in this menu. Now press
Delete All Regs in Seq [4] and
the data in all of the registers stored in sequence 4 will be deleted. Be
certain that you want to delete the data; you cannot recover it once
deleted.
NOTE This softkey has exactly the same function as the softkey with the
identical name in the front panel Recall key menu.
Softkey Location:
Save > Delete All Regs in Seq [n]
Delete All Sequences
Press this softkey to delete all of the data in all saved registers of all
sequences. Be certain that you want to delete the data; you cannot
recover it once deleted.
NOTE This softkey has exactly the same function as the softkey with the
identical name in the front panel Recall key menu.
Softkey Location:
Save > Delete All Sequences
To Next Page
Loading...
