Chapter 4
Front-Panel Key and SCPI Command Reference
Front-Panel Keys
130
Front-Panel Key and SCPI Command
Reference
4.2.2 Power Meter
Accesses the menus for setting and performing calibrations for PSA and power meter.
4.2.2.1 Calibrate Power Meter
Calibrates the power meter.
4.2.2.2 Calibrate Power Meter State
Gets the state of power meter after being calibrated.
4.2.2.3 Power Meter Configuration
Accesses the menu to configure connection with power meter. This key is grayed out when current measurement
is one of the four Audio measurements.
4.2.2.3.1 Channel
Sets the channel for the specified hardware.
Mode: MRECEIVE
Key Path:
System, More, More, Power Meter
Remote Command: :CALibration:PMETer:CALibrate
Dependencies/Couplings: This key is grayed out when current measurement is one of the four Audio
measurements.
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:CAL
Mode: MRECEIVE
Remote Command: :CALibration:PMETer:CALibrate:STAT?
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:CAL:STAT?
Mode: MRECEIVE
Key Path:
System, More, More, Power Meter, Power Meter Config
Remote Command: :SYSTem:COMMunicate:PMETer:CHANnel:SELect A|B
:SYSTem:COMMunicate:PMETer:CHANnel:SELect?
Preset: A
State Saved: Saved in instrument state.
To Next Page
Loading...
Need help?
General
