Agilent Technologies E4448A Manual

36 Chapter 1
Introduction
Installing Optional Measurement Personalities
Introduction
1. Press System, More, More, Licensing, Option to accesses the alpha editor. Use
this alpha editor to enter letters (upper-case), and the front-panel numeric keys
to enter numbers for the option designation. You will validate your option entry
in the active function area of the display. Then, press the
Enter key.
2. Press
License Key to enter the letters and digits of your license key. You will
validate your license key entry in the active function area of the display. Then,
press the
Enter key.
3. Press the
Activate License key.
Viewing a License Key
Measurement personalities purchased with your instrument have been installed
and activated at the factory before shipment. The instrument requires a License
Key unique to every measurement personality purchased. The license key is a
hexadecimal number specific to your measurement personality, instrument serial
number and host ID. It enables you to install, or reactivate that particular
personality.
Use the following procedure to display the license key unique to your personality
option that is already installed in your PSA:
Press
System, More, More, Licensing, Show License. The System,
Personality key displays the personalities loaded, version information, and
whether the personality is licensed.
NOTE You will want to keep a copy of your license key in a secure location. Press
System, More, then Licensing, Show License, and print out a copy of the display that
shows the license numbers. If you should lose your license key, call your nearest
Agilent Technologies service or sales office for assistance.

Agilent Technologies E4448A Specifications

General

Brand	Agilent Technologies
Model	E4448A
Category	Measuring Instruments
Language	English