Chapter 4
Front-Panel Key and SCPI Command Reference
Front-Panel Keys
136
Front-Panel Key and SCPI Command
Reference
4.2.2.6 Zero & Cal Power Meter
Resets & Calibrates the power meter.
4.2.2.7 Zero & Calibrate Power Meter State
Gets the state of power meter after being zeroed & calibrated.
4.2.2.8 Zero Power Meter
Resets the power meter.
4.2.2.9 Zero Power Meter State
Gets the state of power meter after being zeroed.
Mode: MRECEIVE
Key Path:
System, More, More, Power Meter
Remote Command: :CALibration:PMETer:ZCALibrate
Dependencies/Couplings: This key is grayed out when current measurement is one of the four Audio
measurements.
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:ZCAL
Mode: MRECEIVE
Remote Command: :CALibration:PMETer:ZCALibrate:STATe?
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:ZCAL:STAT?
Mode: MRECEIVE
Key Path:
System, More, More, Power Meter
Remote Command: :CALibration:PMETer:ZERO
Dependencies/Couplings: This key is grayed out when current measurement is one of the four Audio
measurements.
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:ZERO
Mode: MRECEIVE
Remote Command: :CALibration:PMETer:ZERO:STATe?
Remote Command Notes: Global to the current mode.
Example: :CAL:PMET:ZERO:STAT?
To Next Page
Loading...
Need help?
General
