Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
226
Front-Panel Key and SCPI Command
Reference
4.4.6.2.1.2 Display Unit
Sets unit for Normal display mode.
4.4.6.2.1.3 Ratio Reference
If PM deviation is to be displayed relative to a reference, enter the value as a ratio reference using this key.
Key Path:
Amplitude Y Scale
Remote Command: :DISPlay:PMDeviation:UNIT RAD|DEG
:DISPlay:PMDeviation:UNIT?
Preset: RAD
State Saved: Saved in instrument state.
Range: rad | deg
Example: :DISP:PMD:UNIT RAD
:DISP:PMD:UNIT?
Key Path:
Amplitude Y Scale
Remote Command: :DISPlay:PMDeviation:RREFerence <degrees>
:DISPlay:PMDeviation:RREFerence?
:DISPlay:PMDeviation:RREFerence:AUTO 0|1|OFF|ON
:DISPlay:PMDeviation:RREFerence:AUTO?
Preset: 1.000
State Saved: Saved in instrument state.
Min: 0.1rad
Max: 800rad
Example: :DISP:PMD:RREF 1.0
:DISP:PMD:RREF?
:DISP:PMD:RREF:AUTO OFF
:DISP:PMD:RREF:AUTO?
To Next Page
Loading...
Need help?
General
