72 Chapter 5
Options and Accessories
Accessories
RF Bridges
The Agilent 86205A 50 RF bridge can be used with the PSA series to make
reflection measurements using an analyzer with the external source control, Option
215.
These external directional bridges offer high directivity and excellent port match.
The 86205A operates over a frequency range of 300 kHz to 6 GHz.
50 Transmission/Reflection Test Kit
The Agilent 87512A provides the accessories to measure the reflection and
transmission characteristics of 50 devices up to 2 GHz. These accessories use
type N connectors. The kit contains a directional bridge, 2 cables and precision
short/load terminations for calibration.
Static Safe Accessories
9300-0797 3M static control mat 0.6 m 1.2 m (2 ft. 4 ft.) with a 4.6 cm
(15 ft.) ground wire. Does not include wrist strap or cord.
9300-1367 Wrist-strap, color black, stainless steel. Four adjustable links
and a 7 mm post-type connection.
9300-0980 Wrist-strap cord 1.5 m (5 ft.).
9300-1308 ESD heel-strap (reusable 6 to 12 months).
Noise Sources (for use with PSA Option 219)
Agilent 346A 10 MHz to 18 GHz noise source with 5 dB ENR (nominal)
Agilent 346B 10 MHz to 18 GHz noise source with 15 dB ENR (nominal)
Agilent 346C 10 MHz to 26.5 GHz noise source with 15 dB ENR (nominal)
Agilent 346CK01 1 GHz to 50 GHz noise source with 21 dB ENR (nominal)
To Next Page
Loading...
Need help?
General
