Index-8 Service Guide E8364-90026
Index
rear panel, 5-10
EXT 10 MHz REF OUT connector
rear panel, 5-10
extender board
measurement points, 4-8
voltages
, 4-8
external analyzer
replaceable parts
illustrated, 6-75
part numbers
, 6-74
external monitor
, 4-13
F
failure
all bands, 4-33
band related, 4-33
broadband
, 4-33, 4-41
of connector repeatability check
,
3-19
of insertion loss check
, 3-15
of magnitude and phase
stability check
, 3-17
of operator’s check
, 3-12
of return loss check
, 3-14
of system verification, 3-27
flowchart
, 3-27
single vs. broadband
, 4-41
fan
removal and replacement, 7-74
troubleshooting
, 4-12
feet
analyzer
illustrated, 6-75
part numbers
, 6-74
firmware upgrade
downloading from the internet,
8-19
Option 099
, 2-5
first converter
channel A
illustrated
, 6-21
part number
, 6-20
removal and replacement
illustrated, 7-51
removal and replacement
illustrated
, 7-51
removal and replacement
procedure
, 7-50
troubleshooting
, 4-52
channel B
illustrated
, 6-21
part number, 6-20
removal and replacement
illustrated
, 7-51
removal and replacement
procedure
, 7-50
troubleshooting
, 4-52
channel R1
illustrated
, 6-21
part number, 6-20
removal and replacement
illustrated
, 7-51
removal and replacement
procedure
, 7-50
troubleshooting
, 4-52
channel R2
illustrated
, 6-21
part number
, 6-20
removal and replacement
illustrated
, 7-51
removal and replacement
procedure
, 7-50
troubleshooting
, 4-52
fixed attenuator
channel R1
illustrated, 6-21
operation
, 5-17
part number
, 6-20
channel R2
illustrated
, 6-21
operation
, 5-17
part number, 6-20
floppy disk drive
data storage, 5-33
illustrated
, 6-73
operation, 5-33
part number
, 6-72
removal and replacement
illustrated
, 7-61
procedure
, 7-60
flowgraph
of one port error terms, 8-4
of two port error terms, 8-5, 8-6,
8-7
using to identify error terms
, 8-4
Fourier transform
, 2-3
fractional-N synthesizer board
illustrated, 6-13, 6-17
operation
, 5-8
operation, A9
, 5-24
part number
, 6-12, 6-16
removal and replacement
illustrated
, 7-19
procedure
, 7-18
test nodes, A8
, 4-38
test nodes, A9
, 4-40
troubleshooting
band 2
, 4-44
band 2 for A9
, 4-55
bands 0 and 1, 4-44
bands 0 and 1 for A9
, 4-55
bands 3–25
, 4-45
frequency accuracy
test, 3-33
frequency adjustment
at 10 MHz, 3-41
at 3.8 MHz
, 3-42
frequency offset
functional description of, 5-4,
5-5
frequency offset group
block diagram, 5-25
defined, 4-32
operation
, 5-24
troubleshooting
, 4-54
frequency offset mode
Option 080, 2-4
frequency offset receiver
illustrated, 6-17
part number
, 6-16
removal and replacement
illustrated
, 7-25
procedure
, 7-24
troubleshooting, 4-57
frequency range
and max output power, 5-4
frequency reference board
illustrated, 6-13, 6-17
operation, 5-9
part number
, 6-12, 6-16
removal and replacement
illustrated
, 7-19
procedure
, 7-18
test nodes
, 4-37
troubleshooting, 4-43, 4-54
frequency upgrade to 40 GHz
Option 040, 2-4
frequency upgrade to 50 GHz
Option 050, 2-4
frequency upgrade to 67 GHz
Option 067, 2-4
front panel
connectors
probe power
, 5-31
USB
, 5-31
interconnects
, 5-31
knob
part number
, 6-10
test
, 4-19
troubleshooting
, 4-17
LED board
illustrated
, 6-69, 6-71
part number
, 6-68, 6-70
operation
, 5-31
speaker
, 5-31
subgroup
, 5-29
USB
troubleshooting
, 4-17, 4-22
front panel assembly
removal and replacement
illustrated, 7-11
procedure
, 7-10
replaceable parts
To Next Page
Loading...
Need help?
General
