Agilent Technologies G2260A Reference Manual

32
Installing the Autosampler
Sample Trays
Sample Trays
Installing the Sample Tray
1 Open the front door.
2 Load the sample tray with sample vials as required.
3 Slide the sample tray into the autosampler so that the rear of the sample
tray is seated firmly against the rear of the sample-tray area.
4 Press the front of the sample tray down to secure the tray in the
autosampler.
NOTE If the thermostatted autosampler tray pops out of position the air channel
adapter is not correctly inserted.
Figure 11 Installing the Sample Tray

Agilent Technologies G2260A Specifications

General

Brand	Agilent Technologies
Model	G2260A
Category	Laboratory Equipment
Language	English