Agilent Technologies G2260A Reference Manual

114
Repairing the Autosampler
Stator Face
Stator Face
CAUTION The stator face is held in place by the stator head. When removing the stator
head, ensure the stator face does not fall out of the valve.
Frequency Poor injection-volume reproducibility
Leaking injection valve
Tools required 1/4 inch wrench (supplied in accessory kit)
Hex key, 9/64 inch (supplied in accessory kit)
Parts required Stator face 0100-1851 for G1313A and G1329A
Stator face 0101-1268 for G2260A
Before beginning this procedure:
❏ Remove the front cover.
1 Remove all capillary fittings from the
injection-valve ports.

Agilent Technologies G2260A Specifications

General

Brand	Agilent Technologies
Model	G2260A
Category	Laboratory Equipment
Language	English