Agilent Technologies ICP-MS Series User Manual

Agilent ICP-MS
Interactive Troubleshooting tool for
Plasma ignition problem
Next >
Rev. B
2017, January, 20

Agilent Technologies ICP-MS Series Specifications

General

Brand	Agilent Technologies
Model	ICP-MS Series
Category	Measuring Instruments
Language	English

Summary

Water and Gas Flow Troubleshooting

1.1 Check Water flow and Gas flow errors

Verify instrument status for specific error codes related to water and gas flow.

1.2 Check water and argon gas

Inspect cooling water and argon gas supply valves and levels for proper operation.

Argon Gas, Torch, and System Components

2.3 Torch Ignition Test

Temporarily block the torch end to test plasma ignition capability.

2.4 Torch Box Component Inspection and Issues

Inspect the torch box and its components for damage, incorrect assembly, and related issues.

Photo Sensor Cable Diagnostics

3.1 Photo Sensor Cable Check

Inspect the photo sensor cable for correct installation and signs of damage.

Vacuum System and Cone Checks

4.1 IF/BK Vacuum Pressure Errors

Check IF/BK vacuum pressure errors by reviewing the instrument status pane for specific error numbers.

4.2 Sampling and Skimmer Cone Inspection

4.8 User Tune Function Usage

Spray Chamber and Water Flow Issues

6.1 Spray Chamber Check

6.3 Water and Gas Flow Error Check