Agilent Technologies ICP-MS Series User Manual

Preconditions
• 7900, 7800, 7700, 8800, or 8900 ICP-MS is used.
• Sample introduction type is “PeriPump”. If you are using a special configuration such as
LC/GC integration or ISIS, setup the instrument with standard configuration.
• You have the “Hardware Maintenance Manual” for your instrument. Some details of the
operations are not in this tool. You should refer to the manual.
<Previous Next >

Agilent Technologies ICP-MS Series Specifications

General

Brand	Agilent Technologies
Model	ICP-MS Series
Category	Measuring Instruments
Language	English