263
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
s1
17
Save/Recall (Setups, Screens, Data)
Saving Setups, Screen Images, or Data 263
Recalling Setups, Masks, or Data 274
Recalling Default Setups 276
Performing a Secure Erase 277
Oscilloscope setups, reference waveforms, and mask files can be saved to
internal oscilloscope memory or to a USB storage device and recalled
later. You can also recall default or factory default setups.
Oscilloscope screen images can be saved to a USB storage device in BMP
or PNG formats.
Acquired waveform data can be saved to a USB storage device in
comma- separated value (CSV), ASCII XY, binary (BIN), and Agilent logic
analyzer binary (ALB) formats.
There is also a command to securely erase all the oscilloscope's
non- volatile internal memory.
Saving Setups, Screen Images, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Save.
3 In the Save Trace and Setup Menu, press Format; then, turn the Entry
knob to select the type of file you want to save:
To Next Page
Loading...
Need help?
General
