302 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
20 Web Interface
The web interface for InfiniiVision X- Series oscilloscopes also provides
help for each of its pages.
Microsoft Internet Explorer is the recommended Web browser for
communication and control of the oscilloscope. Other Web browsers may
work but are not guaranteed to work with the oscilloscope. The Web
browser must be Java- enabled with Sun Microsystems Java Plug- in.
Before you can use the web interface, you must place the oscilloscope on
the network and set up its LAN connection.
Accessing the Web Interface
To access the oscilloscope's web interface:
1 Connect the oscilloscope to your LAN (see "To establish a LAN
connection" on page 285) or establish a point- to-point connection (see
"Stand- alone (Point- to- Point) Connection to a PC" on page 286).
It is possible to use a point- to- point connection, but using a normal
LAN connection is the preferred method.
2 Type the oscilloscope's hostname or IP address in the web browser.
The oscilloscope's web interface Welcome Page is displayed.
To Next Page
Loading...
Need help?
General
