Series N5700 User’s Guide 15
2
Installation
General Information..........................................................................................16
Inspecting the Unit ...........................................................................................17
Installing the Unit.............................................................................................. 17
Connecting the Line Cord ................................................................................ 19
Connecting the Load.........................................................................................21
Output Voltage Sensing ................................................................................... 24
Load Considerations.........................................................................................26
Parallel Connections......................................................................................... 28
Series Connections...........................................................................................30
J1 Connector Connections .............................................................................. 32
This chapter describes how to install your power supply. It discusses
installation, rack mounting, and line cord connections.
This chapter also discusses how to connect your load to the output
terminals. It discusses what you need to know about wire sizes and
how to compensate for voltage drops in the load leads. It also
discusses various loads configurations and how to connect units in
series and parallel.
Before getting started, check the list under “Items Supplied” and
verify that you have received these items with your instrument. If
anything is missing, please contact your nearest Agilent Sales and
Service Office.
To Next Page
Loading...
Need help?
General
