What to do if my Agilent Technologies U8002A is not working?
If your Agilent Technologies Power Supply is not working, check the following: * Make sure the AC power cord is properly connected to the power supply. * Ensure the front-panel power switch is in the "ON" position. * Confirm the power-line voltage setting is correct. * Verify that the power-line fuse is correctly installed.
General| Output Voltage | 0 to 30 V |
|---|---|
| Number of Outputs | 1 |
| Display | LCD |
| Remote Sensing | Yes |
| Output Current | 0-5 A |
| Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40 to 70 °C |
Title and scope of the User's and Service Guide.
Copyright, warranty, technology licenses, and rights.
Safety symbols and general safety precautions.
Environment conditions, regulatory marks, WEEE, and conformity.
Steps to validate the power supply is ready for use.
Procedures to verify output and front panel response.
Steps to resolve issues if the power supply doesn't turn on.
Instructions for mounting the power supply in a 19-inch rack.
Explains front and rear panel controls, indicators, and connectors.
Defines display indicators and describes product features.
Procedures for inspection, installation, cooling, and connections.
Guides for constant voltage (CV) and constant current (CC) operation.
Memory operations, OVP, OCP programming, and keylock.
Backlight control and system reset/self-test functions.
Detailed electrical specifications for the power supplies.
Additional performance data and protection features.
Equipment warranty, service, and replacement parts.
Common failures, troubleshooting, and line voltage conversion.
Procedures for verifying performance and calibrating the unit.
Step-by-step guides for voltage and current calibration.
Table of operational and calibration error codes.
To Next Page