What to do if my Agilent Technologies U8001A is not working?
If your Agilent Technologies Power Supply is not working, check the following: * Make sure the AC power cord is properly connected to the power supply. * Ensure the front-panel power switch is in the "ON" position. * Confirm the power-line voltage setting is correct. * Verify that the power-line fuse is correctly installed.
General| Brand | Agilent Technologies |
|---|---|
| Model | U8001A |
| Category | Power Supply |
| Language | English |
Warranty terms and conditions for the document content.
License terms for the hardware and software described in this manual.
Government rights for software and technical data, as per federal regulations.
Defines CAUTION and WARNING messages for safe instrument operation.
Symbols for current types, ground, protective, and chassis terminals.
Symbols for power status, insulation, electric shock, danger, and hot surfaces.
Symbols indicating bi-stable push control positions.
General safety precautions: Do not use damaged devices; observe markings; avoid flammables; no unauthorized modifications; use provided adapter.
General safety precautions: Use provided cables; qualified personnel for service.
Specifies operating temperature, humidity, storage, and altitude for the instrument.
Lists relevant safety and EMC standards the product complies with.
CE mark for EU directives and ICES/NMB-001 for Canadian ISM devices.
CSA mark for Canada, C-tick for Australia, and WEEE for electronic waste.
Identifies manufacturer and product name, models, and options.
Declares compliance with Low Voltage and EMC Directives.
Lists specific EMC and Safety standards the product meets.
Provides date of declaration and Quality Manager information.
Details EMC and Safety standards with performance criteria and notes.
Definitions for performance criteria A, B, C, D, and N/A.
Specific regulatory information for Canada and Australia/New Zealand.
Chapter 1 covers initial setup, output checks, and rack-mounting.
Chapter 2 explains instrument description, panel layouts, and installation.
Chapter 3 details operational features and protection mechanisms.
Chapter 4 lists performance and supplemental characteristics.
Chapter 5 provides warranty, troubleshooting, and calibration procedures.
Steps to validate the power supply readiness: check items, connect power.
Procedures to verify rated outputs and front panel response.
Guidance for issues when the power supply does not turn on.
Instructions for mounting the instrument in a 19-inch rack cabinet.
Overview of the front panel controls, indicators, and their functions.
Overview of the rear panel connectors and components.
Explanation of the meaning and function of each display annunciator.
General description of Agilent U8001A/U8002A power supplies and their features.
Procedures for receiving, inspecting, and preparing the instrument for installation.
Guidelines for proper cooling and placement of the power supply.
Instructions for connecting outputs and managing voltage drops for optimal performance.
Step-by-step procedure for performing constant voltage (CV) operation.
Step-by-step procedure for performing constant current (CC) operation.
Instructions for storing and recalling operating states using memory locations.
How to set the OVP trip level, enable, disable, and clear OVP conditions.
How to set the OCP trip level, enable, disable, and clear OCP conditions.
Enables and disables the front panel lock function for settings security.
Instructions for turning the LCD backlight on and off.
Procedures for resetting to factory defaults and understanding power-on self-test.
Table detailing electrical parameters like output ratings, regulation, noise, and accuracy.
Details temperature coefficient, voltage overshoot, programming speed, and protection features.
Specifies input voltage options and fuse requirements.
Provides dimensions and weight of the power supply models.
Information on warranty terms, extended service contracts, and obtaining repair service.
List of replaceable parts with part numbers and descriptions for ordering.
Checklist for common failures and troubleshooting steps, including unit inoperability.
Procedure for changing the line voltage setting and replacing the fuse.
Tests for verifying Constant Voltage programming and readback accuracy.
Tests for verifying Constant Current programming and readback accuracy.
Steps for calibrating the power supply at low, middle, and high voltage points.
Steps for calibrating the power supply at low, middle, and high current points.
Table of operation and calibration error codes with their interpretations.
To Next Page