2 U8001A/U8002A User’s and Service Guide
1 Quick Start
Preliminary Checkout
The following steps help you to validate that the power supply is
ready for use.
1 Check the list of supplied item.
Verify that you have received the following items together
with your power supply. If anything is found missing, contact
your nearest Agilent Technologies Sales Office.
• Power cord
• Certificate of Calibration
• Product Reference CD- ROM
2 Connect the power cord and turn on the power supply.
The front- panel display will light up while the power supply
performs its power- on self- test. The firmware revision is also
displayed. If the power supply does not turn on properly, see
page 5.
The power supply is shipped from the factory with a power- line cord that
has a plug approriate for your location. Your power supply is equipped with
a 3- wire grounding type power cord; the third conductor being the ground.
The power supply is grounded only when the power- line cord is plugged
into an appropriate receptacle. Do not operate your power supply without
adequate cabinet ground connection.
To Next Page
Loading...
Need help?
General
