14 U8001A/U8002A User’s and Service Guide
2 General Information
Cooling and location
Cooling
The power supply can operate at rated specifications within the
temperature range of 0 °C to 40 °C. Power supply loading is
derated from 40 °C to 55 °C. A fan cools the power supply by
drawing air through the sides and exhausting it out the back.
Using an Agilent rack- mount will not impede the flow of air.
Bench Operation
Your power supply must be installed in a location that allows
sufficient space at the sides and rear of the power supply for
adequate air circulation.
Cleaning
No cleaning is required for this product. If you wish to remove
dust from the enclosure, use a dry cloth.
To Next Page
Loading...
Need help?
General
