General Information 2
U8001A/U8002A User’s and Service Guide 13
Installation
Initial inspection
When you receive your power supply, inspect it for any obvious
damage that may have occurred during shipment. If any damage
is found, notify the carrier and the nearest Agilent Technologies
Sales Office immediately. Warranty information is shown in the
front of this manual.
Keep the original packing materials in case the power supply
has to be returned to Agilent Technologies in the future. If you
return the power supply for service, attach a tag identifying the
owner and model number. Also include a brief description of
the problem.
Mechanical Check
This check confirms that there are no broken terminals or knob
and that the cabinet and panel surfaces are free of dents and
scratches. Verify that the display is not scratched or cracked.
Electrical Check
Chapter 1 describes quick operation procedure that verifies to a
high level of confidence that the power supply is operating in
accordance with its specifications. More complete verification
procedures are included in the “Service Guide” on page 35.
To Next Page
Loading...
Need help?
General
